香港曾道人六閤彩官方网站
Location: NEWS > Industry News

HOW TO RECYCLING USED LEAD ACID BATTEIES

Date:2016-07-19

RECYCLING USED LEAD ACID BATTEIES
 RECYCLING USED LEAD ACID BATTERIES

Introduction

Batteries are used whenever electrical energy is needed but there is no direct connection to the public electricity grid. A battery can convert chemical energy directly to electrical energy. Depending on the battery system, this converting process is irreversible or reversible. When the process is irreversible, the battery is called a primary battery. The reversible batteries are called secondary batteries and can be recharged up to 1000 cycles(i.e. lead acid battery- checken). A lead acid battery is rechargeable and is commonly used as a result of its good properties like low maintenance and suitable for many purposes. Furthermore they are easily available and are relatively cheap.

Lead-acid batteries either start or power cars, trucks,buses, boats and trains all over the world. This usage is well known but during the last years another usage is increasing. Solar panels are becoming cheaper and an enormous boost is seen in the adaption of solar applications in rural areas in developing countries where no electrical grid is available. As lead acid batteries are still the cheapest way to store energy, almost all these solar applications contain a lead acid battery.

However, lead is a very toxic metal and once the battery is not useful anymore, it is of the utmost importance that proper collection and recycling takes place. In order to effectively understand the issues about lead acid batteries in the solid waste stream and the benefits of diverting them to recycling, it is important to know some technical aspects of the lead acid battery, the public health and environmental risks associated with disposing of them, recycling methods and relevant legislation developed to minimize risks involved with the use and recycling.

Technicalaspects

 图片

Lead Acid Battery cells consist of a lead (Pb) electrode nd a lead oxide (PbO2) electrode immersed in a solution of water and sulphuric acid (H2SO4). When the battery is connected to a load and energy is generated,the lead combines with the sulphuric acid to create lead sulphate (PbSO4), and the lead oxide combines with hydrogen and sulphuric acid to create lead sulphate and water (H2O). As the battery discharges, the lead sulphate builds up on the electrodes, and the water builds up in the sulphuric acid solution.When the battery is charged, the process reverses, with the lead sulphate combining with water to build up lead and lead oxide on the electrodes.

Generally there are two types of Lead-acid storage batteries, based on their method ofconstruction: flooded or sealed. Flooded (or wet) lead acid batteries are those where the electrodes/plates are immersed in electrolyte and regular refilling with water is necessary to safeguard proper activity. In a sealed lead acid or valve-regulated Lead acid (VRLA) battery the electrolyte is immobilized. All lead acid batteries produce hydrogen and oxygen gas (gassing) at the electrodes during charging through a process called electrolysis. These gases are allowed to escape a flooded cell, however the sealed cell is constructed so that the gases are contained and recombined.

The grid structure in both batteries is made from a lead alloy. A pure lead grid structure is not strong enough and therefore other metals like antimony, calcium, tin, and selenium in small quantities are alloyed for added strength and improved electrical properties.

Lifetime

The battery lifetime is defined as the period of time in which a battery is capable of being recharged and retain the charge applied.Once the battery is no longer capable of being recharged or cannot retain its charge properly, its lifetime reaches its end and it becomes a `used battery`for the application it was designed for (UNEP, 2003).

The lifetime of a lead acid battery is very dependent on its rate, conditions and kind of use. It is estimated to be between 1 up to 5 years.

Composition

The typical lead acid battery comprises of: metal grids, electrode paste, Sulphuric acid, connectors and poles of lead alloy, and grid separators made up of PVC (see table 1). The battery components are contained in a corrosion and heat-resistant housing usually composed of plastic (polycarbonate, polypropylene, or polystyrene) Component

[wt.-%]

Lead (alloy) components (grid, poles)

25 - 30

Electrode paste (fine particles of Lead oxide and Lead sulphate)

35 - 45

Sulphuric acid (10 - 20 % H2SO4)

10 - 15

Polypropylene

5 - 8

Other plastics (PVC, PE, etc.)

4 - 7

Ebonite

1 - 3

Others materials (glass, etc.)

< 0.5

Recycling

Returning used lead acid batteries to the recycling loop has along tradition. Thanks to the compactness of the battery, its high lead proportion and relatively high metal prices, it has been worthwhile for consumers to return their own or collected car batteries to the scrap trade or secondary smelters. This is also the case in low-income countries and return rates of up to 80% can be achieved normally through an informal collection system of scrap dealers, secondary lead processors and consumers (Vest, 2002).

Why recycle lead acid batteries?

The benefits of recycling of lead acid batteries are numerous.Unless we recycle used batteries certain toxic components pose a potential risk to the environment and human health. Moreover recovering scrap batteries has the advantages that it is easier and much less energy intensive than producing new lead from ore (the production of recycled lead requires 35-40% of the energy needed to produce lead from ore.) Recycling also reduces dispersal of lead in the environment and conserves mineral resources for the future when done in a proper way (Thornton, 2001).

However recycling of used lead acid batteries according international guidelines is not a simple process which can be done in small scale enterprises. Certain measures need to be taken to prevent negative impact to people and environment. The processes involved in recycling of used lead acid batteries will be summarized below following the descriptions in the technical guidelines for the Environmentally Sound Management of Waste Lead-acid Batteries (UNEP, 2003).

Collection

Used acid lead batteries must be collected, transported and stored with proper care, in order to avoid adverse health effects and environmental contamination. Special measures need to be taken at collection points and batteries should NEVER be drained at collection points as no guarantee can be given for safe treatment of the sulphuric acid with all hazards involved with the drainage to health and environment.

The recycling technology

The recycling process can be divided into three major processes:

1.     Battery breaking

2.     Lead reduction

3.     Lead refining.

 

Battery breaking

Batteries must always be drained before they enter the recycling process. They should only be drained to a purpose built effluent treatment plant so that the acid can be treated and neutralized. Next the batteries are broken in a hammer mill or another type of crushing machine. Manual battery breaking should be avoided due to the health and safety risks associated with this practice.

The pieces from the breaking process are placed in a tank, where the dissimilar densities of the materials cause some to sink (lead), some to float (hard rubber and plastic) and liquids to go into solution (battery acid).From here, the materials are separated and treated individually.

The plastic is cleaned and transported to a plastic recycler. The acid is neutralized.

Lead Reduction

The battery scrap obtained from the breaking process is a mixture of several substances: metallic lead, lead oxide, lead sulphate and other metals such as calcium, copper, antimony, arsenic, tin and sometimes silver. In order to isolate the metallic lead from this mixture, these materials are charged into a furnace together with appropriate fluxes & reductants, drosses, returning slags and process dusts for smelting. Off-gases from the smelting furnace are filtered and the dust collected is returned to the furnace. The metal tapped from the kiln is transferred to refining kettles and processed to produce commercial quality lead.图片

Lead refining

As a smelting plant stops at the stage of the reduction plant, it will produce what is known as hard or antimonial lead. If the plant wants to produce soft lead, other metals like copper, antimony, arsenic and tin have to be removed. The refining process is applied in several steps in kettles with addition of specific agents. After this process the soft lead can be poured into moulds called “ingots”. These ingots are sold on the local or international market.

Pollution control measures

In the recycling plant, effective control measures need to be implemented, both to protect the health of workers and to prevent pollution of the environment. Good plant design, with reduction of the potential for the emission of contaminating substances, is of utmost importance, and the newer smelting processes are inherently much cleaner than traditional blast furnaces.Pollution abatement technologies, including the treatment of exhaust gases and liquid effluents, need to be installed.

Those mostly exposed to releases within the plant are the workforce. Control measures such as maintaining minimum standards of air quality within the works, medical surveillance of employees, use of protective equipment, and provision of conditions of good hygiene in general, is necessary to avoid occupational lead exposure.

Health and environment

While using the lead acid battery for electricity, hazards exist during refilling of the flooded batteries. Harmful effects can occur during production and after its useful life, during recycling. At the end of its life the battery is classified as a hazardous waste under the Basel Convention and should be handled accordingly in order to prevent damage to human health or to the environment (UNEP, 2003).

Health

Lead is considered as one of the most toxic heavy metals. Its useis restricted and banned in some applications, like gasoline additives and tubes for drinking water (CE, 2000). Today, it is known that exposure to lead can cause adverse effects on many parts of the body. The organs potentially most affected are the brain and nervous system, kidneys, blood, and there productive system of both sexes. Lead in certain forms is also considered a possible carcinogen. Of particular concern is that relatively low levels can affect the developing fetus and young children, impairing their mental development and causing a small but measurable decrease in IQ. However,clinical symptoms are only found in very highly exposed individuals (who are usually exposed at work) and this is now extremely rare in the Western World.

Next to lead, also emissions of Antimony and Arsenic can take place which both are known as toxic substances. Furthermore Arsenic is known as carcinogenic (CE, 2000). Sulfuric acid is a highly corrosive acid which can destroy tissues of living organisms (UNEP, 2002).

Environment

The manufacturing as well as the recycling (smelting) of lead acid batteries can have negative impacts on the environment (Avellaneda dela Calle, 2002):

Air: Emission of lead (and other heavy metals) dust and fumes.

Soil: Spilling and leaking of acid from the batteries directly to the soil. Leaching

of acid and lead salt due to improper processing.

Water: Spilling and leaking of acid to water surfaces.Direct dilution of lead salts in water or through rain water when present in soil.

These emissions can pollute the soil and poison the ground water with negative effects on the ecosystems (plants, animals, humans).

International legislation

As used lead acid batteries are regarded as hazardous waste, various laws, decrees and guidelines are developed on international and European level to deal with these materials. For used lead acid batteries often specific legislation is developed in combination with household batteries.

United Nations

On an international level the Basel convention is very important for both used lead acid batteries. Furthermore the Secretariat of the basel Convention has set up guidelines for a safe treatment of used lead acid batteries.

In March 1989, the Basel Convention on the Control of Trans-boundary Movements of Hazardous Wastes and their Disposal, was adopted.The treaty entered into force in 1992. Drawing on the principles of environmentally sound management, the convention seeks to protect human health and the environment from the risk posed by hazardous wastes. This will require changing the economic equation for wastes in order to motivate the producers of hazardous wastes and people who benefit from the associated goods to take action. To do this, the convention sets out a three step strategy (UNEP 2002):

1.     Minimizing the generation of wastes.

2.     Treating wastes as near as possible to where they were generated.

3.     Minimizing international movements of hazardous wastes.

 

The aim is to cut the amount of hazardous substances - in particular, mercury, cadmium and lead - dumped in the environment; this should be done by reducing the use of these substances in batteries and accumulators and by treating and re-using the amounts that are used.

Conclusion

Recycling of lead acid batteries is not a simple activity which can be done in small enterprises. Constructing,commissioning and operating a modern environmentally sound recycling plant is a very expensive undertaking. Not only does the initial capital investment run into many millions of dollars, but there is an ongoing, and essential, cost over head to cover environmental and hygiene control systems. Any modern recycling plant must have a constant and high throughput of used lead acid batteries. Local governments should focus on an environmentally safe collection of used lead acid batteries and delivery to an environmentally sound smelter,even if this means that used batteries have to be exported to achieve this goal.

Lase: No data

Next: No date

Copyright ? 2016 HUNAN JIANGYE ELECTROMECHANICAL SCIENCE & TECHNOLOGY CORP
TEL:0731-55673015 Alibaba Group

 technical support:hnjing

香港曾道人六閤彩官方网站 天天飞车2019新t车 花花公子注册 动物足球赛名次数学题 桑普多利亚vs热那亚分析 奇趣分分彩app 刀塔自走棋地图 英魂之刃新英雄 北京pk拾开奖历史结果 丛林巫师电子游戏 御龙在天手游有精英怪吗 马竞vs莱万特比分预测 伯恩茅斯vs切尔西 虎爪鞋 第五人格可爱头像 一起来捉妖哪个初始妖精强 热那亚比赛